HP DeskJet 2722 Printer Setup Guide
Symptoms
- - Wireless light blinking or off
- - Printer not visible on network
Common Causes
- - Incorrect network settings
- - Router too far or signal interference
- - Firewall blocking connection
Step-by-Step Fix
Learn how to quickly set up your new HP DeskJet 2722 printer with this easy-to-follow guide, covering all essential steps from unboxing to first print.
Unboxing Your HP DeskJet 2722
Carefully remove the HP DeskJet 2722 printer from its packaging. Remove all protective tape, packing materials, and films from both the exterior and interior of the printer. Confirm that you have the power cord, setup ink cartridges, and any included documentation. It is recommended to keep the box and packing materials.
Connecting to Power and Turning On
Plug the power cord into the power port on the back of your HP DeskJet 2722, then connect the other end directly to a working electrical wall outlet. Avoid using surge protectors or extension cords during this initial step. Press the power button to turn on the printer and allow it to complete its startup routine.
Installing the HP Setup Ink Cartridges
Lift the ink cartridge access door. The cartridge carriage will automatically move to the center. Unpack the black and tri-color setup ink cartridges, taking care to only touch the black plastic. Insert the tri-color cartridge into the left slot and the black cartridge into the right slot. Push each cartridge firmly until it clicks into place. Close the ink cartridge access door.
Loading Paper
Open the input tray. Slide the paper width guides to their outermost position. Place a stack of plain white paper (Letter or A4 size) into the input tray. Adjust the paper width guides inward until they lightly touch the edges of the paper. Extend the output tray extender.
Installing Printer Software with HP Smart App
The most straightforward method to set up your HP DeskJet 2722 is by downloading the HP Smart app. You can find this app on the official HP website (sourceNeeds: provide official HP Smart app download URL) or in your device's app store. Install the app, then open it and follow the guided prompts to add your printer. The app will help you connect to Wi-Fi and install the necessary drivers. Alternatively, you can download specific drivers from the HP support website for your model and operating system (sourceNeeds: provide HP DeskJet 2722 driver download page URL).
Connecting to Wi-Fi Using HP Smart App
Launch the HP Smart app and select 'Add Printer'. The app will scan for your new HP DeskJet 2722. If your printer isn't found, you might need to manually enable Wi-Fi setup mode on the printer (sourceNeeds: provide specific button sequence for Wi-Fi setup mode). Follow the app's instructions to select your wireless network and input the Wi-Fi password. The printer's wireless light will turn solid blue (sourceNeeds: verify light color) when successfully connected.
Perform Printer Alignment
After the ink cartridges are installed and the printer is connected, your HP DeskJet 2722 will typically print an alignment page. Place this page face-down on the scanner glass and press the 'Copy' or 'Scan' button on the printer's control panel as prompted to complete the alignment. This step is critical for ensuring optimal print quality.
Problem discussions
Ask or answer in this exact problem context. The entity and problem are attached automatically so future AI summaries and guide updates use the right evidence.
Community signals will be summarized after discussions, replies, and accepted solutions are available.